Print Friendly, PDF & Email

Applications

Oil and sludge separators are frequently used when light liquids (e.g. oil and petrol) might be released into the water flow, for example in car companies, engine overhauling, gas stations, carwashes, industrial areas parking lots, storage areas, environment parks and factory yard areas.

olieafscheider beton

FOR LIGHT MINERAL LIQUIDS WITH
KOMO CERTIFICATE No. K2641

Product description

ESEP reinforced concrete oil separator for light mineral liquids with or without integrated sludge trap, respectively series KMI 6000 or KM 5000. The KMI 6000 and KM 5000 series are KOMO and CE certified, the PA-KMI 6000, PA-KM 5000, BPA-KMI 6000 and BPA-KM 5000 series are CE certified.

The oil separator can also be equipped with an oil layer thickness and/or high level warning system which alerts you when the oil separator has reached it’s storage capacity. The oil separators are available in the standard capacities of 3 up to 120 litres/second. Other capacities are available by request. The concrete cover either comes pre-assembled watertight to the basin, so that it is delivered as a whole, or it can be set by means of a liquid-tight rubber gasket.

Quality

Optional: provided with internal HDPE lining, tested by KIWA-TNO on chemical resistance in accordance with NEN-EN 858 – BRL 5251. Performance and hydraulic operation tested in accordance with NEN-EN 858, equipped with odour trap on the inlet side, strainer fitted on the outlet side of the sludge trap to retain course solids and automatic closure device on the outlet side, LGA certificate no. 4950177-14. Constructed and designed for static loads conform NEN-EN 858 – BRL 5251, concrete quality KOMO in accordance with NEN-EN 206-1 and NEN-EN 8005, minimum C35/45 environmental class XA3. Manhole cover cast iron-concrete combination in accordance with NEN-EN 124 class B 125 kN or class D 400 kN wheel pressure.

Downloads

Folder
Productsheets